Equipment, accuracy and arcs
Construction questions are marks you can bank, because there is no algebra to go wrong — only care. Bring the right kit and use it properly.
What you need
- A ruler marked in millimetres.
- A pair of compasses stiff enough to hold its setting — tighten the screw.
- A sharp pencil (HB). A blunt pencil costs you the tolerance.
- A protractor, for angles that are given to you.
How accurate must you be?
- Lengths within ±2 mm of the correct value.
- Angles within ±2°.
- Always draw a rough sketch first so you know where the shape will sit on the page.
- Work in pencil, not pen — but never rub out your arcs.
The golden rule: leave your arcs showing
Constructing triangles
There are three sets of information that fix a triangle exactly. Learn which tool opens each one.
| You are given | Name | Tools | Method in one line |
|---|---|---|---|
| Three sides | SSS | ruler + compasses | Draw the longest side, then swing an arc from each end. |
| Two sides and the angle between them | SAS | ruler + protractor | Draw one side, measure the angle, mark the second side along it. |
| Two angles and a side | ASA | ruler + protractor | Draw the side, draw both angles at its ends, extend until the rays meet. |
Example 1Construct triangle ABC with AB = 7 cm, AC = 6 cm and BC = 5 cm. Measure angle BAC.
Example 2Construct triangle PQR with PQ = 6 cm, angle P = 50° and PR = 4.5 cm. Measure QR.
The three compass constructions
These three appear again and again, both on their own and inside locus questions. In every one you keep the compasses at the same setting for a pair of arcs — that is what makes the construction exact.
Perpendicular bisector of AB
- Open the compasses to more than half of AB.
- Centre A: arcs above and below the line.
- Same radius, centre B: two more arcs, crossing the first pair.
- Join the two crossing points. It cuts AB in half at 90°.
Bisector of an angle
- Centre the vertex V: one arc crossing both arms, at P and Q.
- Centre P: an arc inside the angle.
- Same radius, centre Q: an arc crossing it at R.
- Join VR. The angle is now split into two equal parts.
Example 3Construct the perpendicular from the point P to the line L, and hence find the shortest distance from P to L.
Step-by-step construction viewer
Choose a construction and press Next step to reveal one set of arcs at a time. Notice how the compass setting never changes within a pair.
Loci
1. A fixed distance from a point → a circle
“Exactly 3 cm from P” is the circle itself; “less than 3 cm from P” is the region inside it.
2. A fixed distance from a line → a racetrack
Two parallel lines a distance d away, joined by a semicircle at each end — the ends are the bit students forget.
3. Equidistant from two points → perpendicular bisector
“Nearer to A than to B” is the side of that line containing A.
4. Equidistant from two lines → angle bisector
“Nearer to one wall than the other” means the angle bisector of the corner where they meet.
Shading a region that satisfies two or more conditions
- Draw each locus separately, in pencil, with construction arcs showing.
- Decide which side of each boundary you want, one condition at a time.
- Shade only the overlap, and label it R.
- Use a solid boundary when the condition allows equality (“not more than 4 m”) and a dashed one when it does not (“less than 4 m”).
Locus around a line: distance explorer
A straight fence is 8 m long. Drag the slider to change the distance d and watch the region grow. The two ends are always semicircles.
More worked examples
Example 4Construct triangle ABC with BC = 7 cm, angle B = 40° and angle C = 65°. Measure AB.
Example 5Two straight paths meet at a corner V. A bench must be the same distance from both paths and exactly 5 m from V. Describe how to find its position.
Example 6A goat is tied by a 4 m rope to a post at the corner A of a large field. A second post at B, 6 m from A, has a second goat on a 4 m rope. Shade the region that both goats can reach.
Example 7A rectangular field ABCD has AB = 80 m and AD = 60 m, drawn to a scale of 1 cm to 10 m. Shade the region R that is less than 30 m from A and nearer to AB than to AD. Find the real area of R.
Your turn
Practice set
- Which construction gives the set of points the same distance from two fixed points A and B?
- Describe the locus of points exactly 5 cm from a fixed point O, and the locus of points less than 5 cm from O.
- Construct triangle XYZ with XY = 8 cm, XZ = 5 cm and YZ = 6 cm. Which side would you draw first, and why?
- A rectangular lawn is 10 m by 6 m. Describe the locus of points inside the lawn that are exactly 2 m from its longest side.
- Explain why the perpendicular bisector construction needs the compasses opened to more than half of AB.
- A park is a rectangle PQRS with PQ = 60 m and PS = 40 m. A fountain must be nearer to P than to Q, and not more than 25 m from PS. Describe the two boundaries you would draw and the region you would shade.
- The perpendicular bisector of AB — two points, so bisect the line joining them.
- Exactly 5 cm is a circle of radius 5 cm, centre O; less than 5 cm is the region inside that circle (boundary dashed, as 5 cm itself is not included).
- XY = 8 cm first, because it is the longest side; the arcs of radius 5 cm from X and 6 cm from Y then cross cleanly at Z.
- A straight line 2 m from that side and parallel to it, 10 m long. As the lawn is only 6 m wide there are two such lines, one on each side of the centre.
- If the radius were less than half of AB the two arcs would never meet, so there would be no crossing points to join. Equal radii also guarantee the four points form a rhombus.
- Draw the perpendicular bisector of PQ (keep the half containing P) and a line parallel to PS and 25 m from it (keep the side towards PS); shade the overlap and label it R. The second boundary is solid because 25 m is allowed.
Key points to remember
- Never rub out your construction arcs — they carry the method marks.
- SSS uses compasses; SAS and ASA use a protractor. “Ruler and compasses only” bans the protractor completely.
- Draw the longest side first for SSS, and keep lengths within ±2 mm and angles within ±2°.
- Perpendicular bisector: equal arcs from each end, radius more than half the line; join the two crossings.
- Angle bisector: one arc across both arms, then equal arcs from those two points; join to the vertex.
- Loci: fixed distance from a point is a circle; from a line it is two parallels with semicircular ends; equidistant from two points is the perpendicular bisector; from two lines it is the angle bisector.
- For a region, draw every boundary, decide which side of each you want, shade only the overlap and label it R.
- The shortest distance from a point to a line is always the perpendicular distance.
Where next?
📚 Take the full lesson
Construction — objectives, a starter, worked examples, practice and an exit check, taught step by step.
✏️ Practise exam questions
Constructions and Loci — 25 exam-style questions worth 101 marks, with full answers and the mark scheme.
Progress is saved on this device only and appears on the notes home page.