Areas of Quadrilaterals

Algebra 2Module 11: MeasurementGeometry and Trigonometry

Learn areas of quadrilaterals step by step with worked examples you can follow. Then practise with 37 instant-feedback questions. Free Algebra 2 lesson from Mr Ahmed Hamouda.

Find the areas of parallelograms, trapezoids, rhombi, and kites — and work backwards from an area to a missing dimension.

Core Concepts

1. What "base" and "height" really mean

Every area formula on this page is really the same idea: how far across times how far up. The trap is that "how far up" is never a slanted side — it is always measured straight up, at a right angle to the base.

Base of a parallelogram — any side of the parallelogram. All four sides can serve as a base.
Altitude of a parallelogram — a perpendicular segment between any two parallel bases.
Height of a parallelogram — the length of an altitude of the parallelogram.
Height of a trapezoid — the perpendicular distance between the bases of the trapezoid.
Decomposition — the process of separating a figure into two or more nonoverlapping parts.
Diagonal (review) — a segment that connects any two nonconsecutive vertices of a polygon.
Study Tip — Heights of Figures: the height of a figure can be measured by extending a base. In parallelogram ABCD, the height that corresponds to base DC may land outside the figure, on the extension of DC. That is still a legal height.

2. Where the parallelogram formula comes from

Cut a right triangle off one end of a parallelogram and slide it to the other end. Nothing is added and nothing is lost — you get a rectangle with the same base and the same height. A rectangle's area is bh, so the parallelogram's area must be bh too.

Postulate 11.1 · Area Addition Postulate
The area of a region is the sum of the areas of its nonoverlapping parts.

This postulate is what makes decomposition legal: chop a figure into pieces, add the pieces' areas, and you have the whole.

Key Concept · Area of a Parallelogram
The area A of a parallelogram is the product of the base b and its corresponding height h.
A = bh
Watch Out! Units: area is measured in square units — square feet (ft2), square millimetres (mm2), square yards (yd2). If your answer has no exponent on the unit, you have written a length, not an area.

3. Where the trapezoid formula comes from

A trapezoid is a quadrilateral with exactly one pair of parallel sides; those parallel sides are the bases. Take a trapezoid, copy it, rotate the copy 180°, and fit the two together. The result is a parallelogram whose base is b1 + b2 and whose height is h. That parallelogram has area h(b1 + b2), and one trapezoid is exactly half of it.

Key Concept · Area of a Trapezoid
The area A of a trapezoid is one half the product of the height h and the sum of its bases, b1 and b2.
A = ½ h(b1 + b2)
Read it as an average: A = h · (b1+b2)/2. The trapezoid behaves like a rectangle whose width is the average of the two bases.

4. Rhombi and kites — use the diagonals

A rhombus is a parallelogram with all four sides congruent. A kite is a quadrilateral with exactly two pairs of consecutive congruent sides. In both figures the diagonals are perpendicular, so their areas are controlled by the diagonals rather than by a base and height.

Key Concept · Area of a Rhombus or Kite
The area A of a rhombus or kite is one half the product of the lengths of its diagonals, d1 and d2.
A = ½ d1d2
Watch Out! Half-diagonals: the diagonals of a rhombus bisect each other, so a figure labelled "6 mm" and "7 mm" from the centre really has d1 = 12 and d2 = 14. Double every half before you multiply. In a kite, only one diagonal is bisected.

A rhombus is also a parallelogram, so A = bh still works on it — use whichever information you are actually given.

5. When the height is missing

Right triangle in the corner? Use the Pythagorean Theorem: a2 + b2 = c2, where the slant side is the hypotenuse.
45° angle? In a 45°-45°-90° triangle the two legs are equal, so the height equals the horizontal offset.
30° or 60° angle? In a 30°-60°-90° triangle the legs are in ratio 1 : √3, short leg opposite the 30°.
Odd angle? Use trigonometry: h = (slant side) · sin(angle).
Trapezoid with two slant legs? Drop two perpendiculars to split it into right triangle + rectangle + right triangle.
Study Tip — Separating Figures: to solve some area problems you may need to draw in parallel and/or perpendicular lines to find information that is not provided.
1
Parallelogram: A = bh. The h must be perpendicular to the b you chose.
2
Trapezoid: A = ½h(b1 + b2). Only the two parallel sides are bases.
3
Rhombus or kite: A = ½d1d2, using full diagonals.
4
Working backwards from an area is just solving a one-step equation for the unknown length.

Key Figures

Base, Altitude and Height of a Parallelogram
base b height h base
The altitude is drawn between the two parallel bases and meets the base at exactly 90°. Its length is the height h. Any side may be chosen as the base — but the height must match the base you chose.
Why A = bh — Shearing a Parallelogram into a Rectangle
h slide b
The triangle removed from the left end is congruent to the triangle added at the right end, so no area is created or destroyed. The rectangle that results has the same base b and the same height h ∴ A = bh.
Anatomy of a Trapezoid
b1 b2 h
Only the two parallel sides are bases. The two slanted sides are legs — they are never used as h. Here b2 = 10, b1 = 6, h = 4, so A = ½(4)(6+10) = 32 square units.
Why A = ½h(b1+b2) — Two Trapezoids Make a Parallelogram
b2 b1 b1 b2 h parallelogram base = b1 + b2, height = h
The orange trapezoid is the blue one rotated 180°. Together they tile a parallelogram of base b1+b2 and height h, whose area is h(b1+b2). One trapezoid is half of that.
Rhombus and Kite — Perpendicular Diagonals
Rhombus Kite d1 d2 d1 d2
In the rhombus both diagonals are bisected (all four tick pairs match). In the kite only the horizontal diagonal is bisected — the axis of symmetry is longer above the crossing than below. Either way the diagonals meet at 90° and A = ½d1d2.

Move It Yourself

Worked Examples

Find the area of parallelogram ABCD. The slant side AD = 25 ft, the base DC = 23 ft, and the altitude from A meets the extension of DC 7 ft to the left of D.
A B C D 25 ft 7 ft 23 ft h
1h2 + 72 = 252Pythagorean Theorem
2h2 = 625 − 49 = 576Simplify
3h = 24Solve (positive root)
4A = bhArea of a parallelogram
5A = (23)(24) = 552Solve
A = 552 ft2
The trap: 25 ft is the slant side, not the height. Using A = 23 × 25 = 575 is the single most common error on this figure. The height is the dashed segment, and it lands outside the parallelogram on the extension of DC — that is perfectly legal.
Check: 7-24-25 is a Pythagorean triple, and 72 + 242 = 49 + 576 = 625 = 252 ✓
Find the area of a parallelogram with base 17 yd, whose altitude cuts off a 45°-45°-90° corner triangle with a horizontal leg of 9 yd.
145°-45°-90° ⇒ leg = legSpecial right triangle
2h = 9 ydLeg opposite 45° = leg adjacent to 45°
3A = bhArea of a parallelogram
4A = (17)(9) = 153Solve
A = 153 yd2
General trig version: if the slant side has length s and makes an angle θ with the base, then h = s · sinθ and A = b · s · sinθ. The special right triangles are just the shortcut cases θ = 30°, 45°, 60°.
A raised garden bed is shaped like a trapezoid with h = 7 ft, b1 = 8 ft and b2 = 1.5 ft. Find its area, then decide how many 12-square-foot bags of mulch are needed.
1A = ½h(b1 + b2)Area of a trapezoid
2A = ½(7)(8 + 1.5)h = 7, b1 = 8, b2 = 1.5
3A = ½(7)(9.5) = 33.25Solve
433.25 ft2 × (1 bag / 12 ft2) = 2.77 bagsUnit analysis
5round up → 3 bags2 bags would not be enough
A = 33.25 ft2; 3 bags of mulch
Watch Out! When a count of physical items comes from an area, always round up, never to the nearest whole number.
Find the area of the isosceles trapezoid with bases 2 cm and 4 cm and legs of 3 cm each.
2 cm 3 cm 3 cm 1 cm 2 cm 1 cm 4 cm h
1x + 2 + x = 4Bottom base split by the two altitudes
22x = 2, so x = 1Solve
312 + h2 = 32Pythagorean Theorem on a corner triangle
4h = √(9 − 1) = √8 = 2√2Solve
5A = ½h(b1 + b2) = ½(√8)(4 + 2)Area of a trapezoid
6A = 3√8 = 6√2 ≈ 8.49Solve
A ≈ 8.49 cm2
Check by decomposition: rectangle = 2 · 2√2 = 4√2; two triangles = 2 · ½ · 1 · 2√2 = 2√2. Total = 6√2 ✓ (Area Addition Postulate)
Find the area of a rhombus in which the distance from the centre to a vertex is 6 mm along one diagonal and 7 mm along the other.
1d1 = 6 + 6 = 12 mmDiagonals of a rhombus bisect each other
2d2 = 7 + 7 = 14 mmSame reason
3A = ½d1d2Area of a rhombus
4A = ½(12)(14) = 84Solve
A = 84 mm2
The trap: using the half-diagonals directly gives ½(6)(7) = 21 — exactly one quarter of the truth. Doubling both halves multiplies the answer by 4.
Find the area of a kite whose diagonals measure 16 in. and 9 in.
16 in. 9 in.
1A = ½d1d2Area of a kite
2A = ½(16)(9)Substitute
3A = 72Solve
A = 72 in2
Why it works: the perpendicular diagonals cut the kite into four right triangles. Adding their areas gives ½d1d2 no matter where along d2 the crossing point sits — which is why the same formula covers both the rhombus and the kite.
One diagonal of a kite measures 55.88 centimetres. If the area of the kite is 92 square inches, what is the length of the other diagonal in inches, to the nearest tenth? (1 in. = 2.54 cm)
155.88 cm × (1 in. / 2.54 cm) = 22 in.Convert units first
2½d1d2 = AArea of a kite
3½(22)(x) = 92A = 92, d1 = 22, d2 = x
411x = 92, x = 92/11 ≈ 8.4Solve
The other diagonal is about 8.4 in.
Watch Out! Converting units: one measure is metric and the area is in square inches. Convert the length before you substitute — converting an area needs the square of the conversion factor, which is a far easier place to slip.
Check: ½(22)(8.4) = 92.4 ≈ 92 ✓ (small gap is the rounding of 8.36 to 8.4)

Try It Yourself

Practice 1

Find the area of a parallelogram with base 22 cm and height 10 cm.
1A = bhArea of a parallelogram
2A = (22)(10) = 220Substitute and solve
A = 220 cm2

Practice 2

Find the area of a trapezoid with bases 9 in. and 6 in. and a height of 10 in.
1A = ½h(b1 + b2)Area of a trapezoid
2A = ½(10)(9 + 6) = ½(10)(15)Substitute
3A = 75Solve
A = 75 in2

Practice 3

A rhombus has diagonals of 20 m and 11 m. Find its area.
1A = ½d1d2Area of a rhombus
2A = ½(20)(11) = 110Substitute and solve
A = 110 m2

Practice 4

A trapezoid has base lengths of 12 ft and 14 ft and an area of 322 ft2. Find the height, to the nearest tenth.
1322 = ½h(12 + 14)Substitute into the trapezoid formula
2322 = 13h½(26) = 13
3h = 322/13 ≈ 24.8Divide
h ≈ 24.8 ft

Practice 5

A kite has an area of 150 cm2. One diagonal is 25 cm. Find the other diagonal.
1150 = ½(25)(d2)Area of a kite
2150 = 12.5 d2Simplify
3d2 = 12Divide
d2 = 12 cm

Practice 6 — challenge

The height of a parallelogram is 10 ft more than the length of its base. The area is 1200 ft2. Find the base and the height.
1let b = base, h = b + 10Define the variable
2b(b + 10) = 1200A = bh
3b2 + 10b − 1200 = 0Standard form
4(b + 40)(b − 30) = 0Factor
5b = 30 (reject b = −40)A length cannot be negative
base = 30 ft, height = 40 ft
Check: 30 × 40 = 1200 ✓ and 40 is 10 more than 30 ✓

Summary

SituationWhat to doResult
Parallelogram, b and h givenMultiply directlyA = bh
Parallelogram, slant side + offset givenPythagorean Theorem for h, then bhe.g. 7-24-25 → A = 23(24)
Parallelogram, slant side + angle givenh = s · sinθ (or a special right triangle)A = b · s · sinθ
Trapezoid, both bases + hAverage the bases, times the heightA = ½h(b1+b2)
Trapezoid, legs given but no hDrop two altitudes; solve the corner right triangleh = √(leg2 − x2)
Rhombus or kite, diagonals givenHalf the product of the diagonalsA = ½d1d2
Only half-diagonals markedDouble each half firstd = 2 · (half)
Area given, a length missingSubstitute into the formula, solve the equatione.g. ½(22)x = 92
Mixed units (cm and in.)Convert lengths before substituting1 in. = 2.54 cm
Irregular figureDecompose it; add the partsArea Addition Postulate
A = bh A = ½h(b1+b2) A = ½d1d2 a2+b2=c2 h = s·sinθ 45-45-90 → 1:1:√2 30-60-90 → 1:√3:2
Common mistakes to avoid
  • Using a slant side as the height of a parallelogram or trapezoid.
  • Using a leg of a trapezoid as a base — only the parallel sides are bases.
  • Forgetting to double half-diagonals in a rhombus (this quarters the answer).
  • Forgetting the ½ in the trapezoid, rhombus and kite formulas (this doubles the answer).
  • Reporting the answer in linear units instead of square units.
  • Rounding a bag/tile/sheet count down instead of up.
  • Substituting a centimetre length into a square-inch equation without converting.

Practice Quiz

15 questions · click an answer to check it instantly

0/15

๐Ÿ“ Test your understanding