Areas of Circles and Sectors

Algebra 2Module 11: MeasurementGeometry and Trigonometry

Learn areas of circles and sectors step by step with worked examples you can follow. Then practise with 37 instant-feedback questions. Free Algebra 2 lesson from Mr Ahmed Hamouda.

Find the area of a circle, find the area of a sector, and work backward from a sector's area to the radius or the whole circle.

Core Concepts

1. Area of a Circle

Every point on a circle sits the same distance — the radius r — from the centre. The circumference formula C = 2πr measures the rim; the area formula measures the whole flat disk inside that rim.

Key Concept · Area of a Circle
Words: The area A of a circle is equal to π times the square of the radius r.
Symbols: A = πr²

Why r²? Slice the disk into many thin pie wedges and re-arrange them into a near-rectangle. The rectangle's height is r and its base is half the circumference, ½(2πr) = πr. So the area is (πr)(r) = πr². That is exactly the regular-polygon idea A = ½Pa pushed to infinitely many sides.

A = πr²   |   C = 2πr   |   r = d/2
In terms of the diameter: A = π(d/2)² = πd²/4

2. Working Backward from the Area

If you are handed the area and asked for r or d, just undo the formula one step at a time.

Write A = πr² and substitute the known area.
Divide both sides by π to isolate r².
Take the positive square root: r = √(A/π).
If the question asks for the diameter, double it: d = 2r.
Watch Out! A length can never be negative, so we discard the negative square root. And √(A/π) is not the same as √A / π — divide first, then take the root.

3. Sectors

A sector is the "pizza slice" piece of a circle — the region bounded by a central angle and its intercepted arc. It is a fraction of the whole disk, and the fraction is decided entirely by the central angle.

sector — a region of a circle bounded by a central angle and its intercepted arc.
segment of a circle — the region bounded by an arc and its chord (not by two radii).
Key Concept · Area of a Sector
The ratio of the area A of a sector to the area of the whole circle πr² is equal to the ratio of the degree measure x of the intercepted arc to 360°.

Proportion: A / (πr²) = x° / 360°
Equation: A = (x°/360°) · πr²

Notice the family resemblance to arc length, ℓ = (x°/360°) · 2πr. Same fraction, different "whole": length uses the circumference, area uses πr².

Study Tip · Units of Area. When you convert between units of area you must multiply or divide by the square of the length conversion. Since 1 yd = 3 ft, 1 yd² = (3 ft)(3 ft) = 9 ft².

4. Reversing the Sector Formula

Two backward questions show up constantly:

  • Given a sector's area and arc, find the circle's area. Since Asector = (x/360)Acircle, simply multiply: Acircle = Asector · (360/x).
  • Given a sector's area and arc, find the radius. Solve r = √( Asector · (360/x) · (1/π) ).
Acircle = (360/x) · Asector
r = √( Asector (360/x)(1/π) )
1
A = πr² uses the radius. If the problem gives a diameter, halve it first.
2
Asector = (x°/360°)πr². The fraction x/360 is the share of the circle you own.
3
A sector is bounded by two radii and an arc. A segment is bounded by a chord and an arc.
4
Area of a segment = area of its sector − area of the triangle formed by the two radii and the chord.
5
Area units are squared: ft², cm², in². Converting ft² → yd² divides by 9, not 3.

Key Figures

Area of a Circle
r O
The shaded disk is the area: A = πr². The blue outline is the circumference, C = 2πr.
A Sector — Central Angle 120°
r 120° A B O
Sector AOB is exactly 120°/360° = ⅓ of the circle, so its area is (1/3)πr².
Sector vs. Segment
chord 100° A B O
The dashed radii and the arc bound the sector. The orange region above chord AB is the segment: segment = sector − triangle AOB.
Ring (Annulus) — Subtracting Areas
R r
Shaded ring area = πR² − πr² = π(R² − r²). Note this is not π(R − r)².

Move It Yourself

Worked Examples

Part A. A circular region has a diameter of 24 feet. What is its area to the nearest square foot? Part B. Material costs $135 per square yard. About how much does the region cost to cover?
24 ft r = 12 ft
The 24 ft measurement runs through the centre, so it is the diameter.
1A = πr²Area of a circle
2r = 24 ÷ 2 = 12radius is half the diameter
3A = π(12)²r = 12
4A = 144π ≈ 452.39Simplify.
Part A: A = 144π ≈ 452 square feet
5(144π ft²)(1 yd² / 9 ft²) = 16π yd² ≈ 50.27 yd²1 yd² = 9 ft²
6(16π yd²)($135 / 1 yd²) ≈ $6786Solve.
Part B: about $6786
Watch Out! The conversion factor for area is 9, not 3. Dividing 452.39 by 3 gives 150.8, which is wrong — a square yard holds nine square feet.
Find the diameter of a circle with an area of 196π square yards.
1A = πr²Area of a circle
2196π = πr²A = 196π
3196 = r²Divide each side by π.
414 = rSolve. Take the positive square root.
5d = 2r = 2(14) = 28The radius is half the diameter.
d = 28 yards
Check: π(14)² = 196π ✓ — and 28 is twice 14, so the diameter is consistent.
Watch Out! Stopping at r = 14 is the single most common error here. Re-read the question: it asked for the diameter.
A circular piece with a diameter of 3.5 centimetres is divided into 6 congruent sectors. What is the area of one sector to the nearest hundredth?
60° 1.75 cm
Six congruent sectors share 360° equally, so each central angle is 60°.
1x = 360 ÷ 6 = 60Step 1: find the arc measure.
2r = 3.5 ÷ 2 = 1.75radius is half the diameter
3A = (x°/360°) · πr²Step 2: area of a sector
4A = (60/360) · π(1.75)²x = 60 and r = 1.75
5A = (1/6)(3.0625π) ≈ 1.60Solve.
A ≈ 1.60 square centimetres
Check: the whole circle is π(1.75)² ≈ 9.62 cm², and 9.62 ÷ 6 ≈ 1.60 ✓
One sector of a circle has an area of 42 square feet and an arc measure of 45°. Find the area of the circle to the nearest square foot.
45° r = ? shaded sector area = 42 ft²
A 45° sector is 45/360 = ⅛ of the circle, so the circle is 8 times the sector.
1A = (x°/360°) · πr²Step 1: area of a sector
242 = (45/360) · πr²A = 42 and x = 45
3r = √( 42 (360/45)(1/π) ) ≈ 10.34Solve for r.
4A = πr² = π(10.34)²Step 2: area of a circle
5A = 336Solve.
The area of the circle is 336 square feet.
Shortcut. You never actually need r. Since the sector is 45/360 = ⅛ of the circle, multiply straight through: 42 × 8 = 336 ft². Same answer, no square roots.
Check: (45/360)(336) = 0.125 × 336 = 42 ✓
A circle has a marked measure of 8 in. across through the centre, and a sector of arc measure 58°. Ketria writes A = (58/360)·π(8)² = 32.4 in². Colton writes A = (58/360)·π(4)² = 8.1 in². Who is correct?
18 in. spans the centre ∴ 8 = didentify the given measure
2r = 8 ÷ 2 = 4radius is half the diameter
3A = (58/360) · π(4)² = (0.16111)(16π)area of a sector
4A ≈ 8.1Simplify.
Colton is correct: A ≈ 8.1 in²
Watch Out! Ketria squared the diameter. Because area depends on r², using d instead of r makes the answer 4 times too large — and indeed 32.4 = 4 × 8.1.

Try It Yourself

Try 1

Find the exact area of a circle whose radius is 5√2 units.
1A = πr² = π(5√2)²substitute
2(5√2)² = 25 · 2 = 50square both factors
A = 50π square units

Try 2

The area of a circle is 400π m². Find its circumference.
1400π = πr² → r² = 400divide by π
2r = 20positive square root
3C = 2πr = 2π(20)circumference formula
C = 40π ≈ 125.7 m

Try 3

Find the area of a 210° sector of a circle of radius 9 cm. Round to the nearest tenth.
1A = (210/360) · π(9)²area of a sector
2= (7/12)(81π) = 47.25πsimplify the fraction
A ≈ 148.4 cm²
Check: the full circle is 81π ≈ 254.5 cm², and 210° is a bit more than half, so an answer just under 60% of 254.5 is sensible. ✓

Try 4

One sector of a circle has an area of 65 ft² and an arc measure of 270°. Find the area of the whole circle to the nearest tenth.
165 = (270/360) · Asector is 3/4 of the circle
2A = 65 · (360/270) = 65 · (4/3)multiply by the reciprocal
A ≈ 86.7 ft²

Try 5

A circle has radius 10 in. A 90° central angle cuts off a chord. Find the area of the segment between that chord and its minor arc. Round to the nearest tenth.
1Asector = (90/360)π(10)² = 25π ≈ 78.54area of a sector
2the two radii are ⊥, so the triangle is rightcentral angle = 90°
3Atriangle = ½(10)(10) = 50legs are the radii
4Asegment = 78.54 − 50segment = sector − triangle
Asegment ≈ 28.5 in²

Summary

SituationWhat to doResult
Radius r is givenSquare it, multiply by πA = πr²
Diameter d is givenHalve it first, then squareA = π(d/2)²
Area given, need rDivide by π, take the positive rootr = √(A/π)
Area given, need dFind r, then double itd = 2√(A/π)
Central angle x and r givenTake the fraction x/360 of the diskA = (x/360)πr²
Sector area and x given, need the circleMultiply by 360/xAcircle = (360/x)Asector
Sector area and x given, need rUndo both the fraction and πr = √(A(360/x)(1/π))
Region between a chord and an arcSubtract the triangle from the sectorAseg = Asec − A△
Region between two concentric circlesSubtract the small disk from the big oneA = π(R² − r²)
Convert ft² to yd²Divide by 3²1 yd² = 9 ft²
A = πr² C = 2πr A = πd²/4 r = √(A/π) A/(πr²) = x/360 A = (x/360)·πr² Acircle = (360/x)·Asector ℓ = (x/360)·2πr Aring = π(R²−r²) 1 yd² = 9 ft²
Common mistakes to avoid
  • Substituting the diameter into A = πr². That makes the answer 4 times too big.
  • Answering with the radius when the question asked for the diameter (or vice versa).
  • Flipping the sector fraction — writing (360/x)πr² when finding a sector's area.
  • Using the arc-length formula (x/360)·2πr when the question wants area. Areas need πr².
  • Confusing a sector (two radii + arc) with a segment (chord + arc).
  • Converting square units with the linear factor (dividing ft² by 3 instead of 9).
  • Rounding π too early. Carry the exact value and round only at the last step.

Practice Quiz

15 questions · click an answer to check it instantly

0/15

๐Ÿ“ Test your understanding