Skip to content
MathClicksIGCSE← All notes Cambridge IGCSE® Mathematics 0580 Extended Chapter 7 — Perimeter, Area and Volume

7.1  Perimeter and Area in Two Dimensions

Area and perimeter of rectangles, triangles, parallelograms, trapezia and compound shapes — the formulas, where they come from, and how to split awkward shapes into easy ones.

Perimeter: the distance around

The perimeter of a shape is the total length of its boundary — imagine walking once around the edge and adding up every step. It is a length, so its units are cm, m or km, never cm². For a rectangle there is a shortcut worth writing as a formula:

P = 2(l + w) Perimeter of a rectangle — two lengths plus two widths
Key idea Perimeter and area measure completely different things. Perimeter is the length of the fence; area is the amount of grass inside it. Two shapes can share a perimeter and have different areas, and vice versa — Paper 2 loves testing whether you know which is which.

The classic exam twist is a shape with unmarked sides. In a rectilinear shape (all corners 90°) you can always find them, because the horizontal edges on one side of the shape must add up to the horizontal edges on the other, and the same for vertical edges.

Finding unmarked sides in an L-shape

10 cm 5 cm 6 cm 3 cm ? cm ? cm left side = 5 + 3 = 8 cm top edge = 10 − 6 = 4 cm

Going up the right-hand side of the shape you climb 5 then 3, so the single left side must be 5 + 3 = 8 cm. Going across the top you cover the unmarked edge then 6, and together they must match the bottom: 10 − 6 = 4 cm. Now the perimeter is easy: 10 + 5 + 6 + 3 + 4 + 8 = 36 cm.

Exam tip Before you add anything, write a length on every side of the diagram. The mark scheme usually gives a method mark for a correct unmarked side, so the working earns marks even if a later addition slips.

The four area formulas — and why they work

Area measures the amount of flat space inside a shape, counted in unit squares — cm², m² and so on. You need four formulas, and each one is really just the rectangle formula in disguise. Understanding the “why” means you will never mix them up.

Rectangle: the starting point

A rectangle l long and w wide is l columns of w unit squares, so A = lw. Everything else builds on this.

Triangle: half a rectangle

Draw a rectangle around any triangle that shares its base b and height h. The triangle fills exactly half of it, so A = ½bh. The height must be the perpendicular height — the distance measured at right angles from the base to the top vertex — never the slant side.

Parallelogram: a sheared rectangle

Slice a right-angled triangle off one end of a parallelogram and slide it to the other end: you get a rectangle with the same base b and the same perpendicular height h. Nothing was added or removed, so A = bh — note there is no half here.

Trapezium: two copies make a parallelogram

Take a trapezium with parallel sides a and b a distance h apart. Rotate a second identical copy through 180° and fit it alongside: together they form a parallelogram with base a + b and height h. One trapezium is half of that:

A = 12(a + b)h Trapezium — half the sum of the parallel sides, times the distance between them

The four shapes at a glance

l w A = lw b h A = ½bh b h A = bh a b h A = ½(a+b)h
Watch out Every one of these formulas uses the perpendicular height. Examiners deliberately print the slant side on the diagram too. If a triangle shows a base of 8, a height of 5 and a slant side of 6.4, the 6.4 is a decoy — using it is the single most common lost mark on this topic.
Exam tip On the formula list you are given the area of a triangle — but not the rectangle, parallelogram or trapezium formulas. Those three you must know by heart for Paper 2 and Paper 4.
Example 1A triangle has base 8 cm, perpendicular height 5 cm and slant sides of length 6.4 cm. Find its area.
1
Pick out the measurements the formula actually needs: the base and the perpendicular height. The slant side is not used at all. b = 8 cm,  h = 5 cm  (ignore 6.4 cm)
2
Substitute into A = ½bh. A = ½ × 8 × 5 = 20
Area = 20 cm²
Exam trap ½ × 8 × 6.4 = 25.6 looks like working but scores zero. If you catch yourself using a slant length in an area formula, stop and re-read the diagram.
Example 2A trapezium has parallel sides 6 cm and 10 cm, which are 4 cm apart. Find its area.
1
Identify a, b and h. The 4 cm is the distance between the parallel sides — that is the height. a = 6,  b = 10,  h = 4
2
Substitute into the formula. Add the parallel sides first. A = ½(a + b)h = ½ × (6 + 10) × 4
3
Work through carefully. A = ½ × 16 × 4 = 32
Area = 32 cm²

Trapezium explorer

Drag the sliders to reshape the trapezium (lengths in cm) and watch the substitution update. Tick the box to see why the formula works.

Parallel side a (top)6
Parallel side b (bottom)10
Height h4

Compound shapes: split it or subtract it

A compound shape is built from simple shapes joined together — an L-shape, a T-shape, a rectangle with a triangle on top. There are two strategies, and you should choose whichever needs fewer calculations:

Strategy 1 — split

Cut the shape into rectangles, triangles or trapezia with a ruler line. Find each area, then add. Works for every compound shape.

Strategy 2 — subtract

See the shape as a big simple shape with a piece removed — a rectangle with a corner bitten out, a frame, a path around a lawn. Find the outer area, then subtract the missing part.

Why this works Area is additive: if a shape is cut into non-overlapping pieces, the areas of the pieces add up to the whole. That is also why subtracting works — the L-shape plus the missing corner rebuild the full rectangle.

Whichever strategy you use, follow the same routine every time:

  1. Label every length first, using the opposite-sides trick from the perimeter section.
  2. Draw your split line (or sketch the missing piece) on the diagram.
  3. Write one clear area calculation per piece — the mark scheme awards these separately.
  4. Add or subtract, and give units.
Example 3An L-shape is formed by removing a rectangle from the top right corner of a 12 cm by 9 cm rectangle. The bottom is 12 cm, the right side is 5 cm, the inner horizontal edge is 5 cm and the inner vertical edge is 4 cm. Find (a) the perimeter and (b) the area of the L-shape.
1
Label the two unmarked sides first. The left side must match the whole right-hand climb, and the top edge plus the inner edge must match the bottom. left side = 5 + 4 = 9 cm
top edge = 12 − 5 = 7 cm
2
(a) Add all six sides for the perimeter. P = 12 + 5 + 5 + 4 + 7 + 9 = 42 cm
3
(b) Subtract: the full rectangle is 12 × 9 and the missing corner is 5 × 4. A = 12 × 9 − 5 × 4 = 108 − 20 = 88
4
Check by splitting instead: a 12 × 5 rectangle below plus a 7 × 4 rectangle above. 60 + 28 = 88  ✓
(a) P = 42 cm     (b) A = 88 cm²
Why this works Notice the perimeter, 42 cm, equals 2(12 + 9) — the perimeter of the uncut rectangle. Cutting a rectangular notch from a corner slides edges inwards without changing the total boundary length. Cutting a notch from the middle of a side, however, makes the perimeter longer — so always add the sides rather than relying on this shortcut.

Converting area units

Length units convert with one factor: 1 m = 100 cm. Area units convert with that factor squared, because a square metre is a 100 cm by 100 cm square:

1 m² = 100 × 100 = 10 000 cm² Square the length factor when converting areas
ConversionLength factorArea factor
cm² ↔ mm²1 cm = 10 mm1 cm² = 100 mm²
m² ↔ cm²1 m = 100 cm1 m² = 10 000 cm²
km² ↔ m²1 km = 1000 m1 km² = 1 000 000 m²
Watch out Writing 1 m² = 100 cm² is the classic error. Picture the square metre tiled with centimetre squares: 100 rows of 100 gives 10 000. If a conversion answer looks only slightly bigger or smaller, you have probably used the length factor instead of its square.
Exam tip Convert the lengths into the units the answer wants before you calculate the area, and you avoid the squared factor entirely. Finding an area in cm² then converting to m² works too, but only if you divide by 10 000, not 100.

More worked examples

Example 4A trapezium has parallel sides 7 cm and 11 cm and an area of 45 cm². Find the distance between the parallel sides.
1
Write the formula and substitute everything you know, using h for the unknown height. 45 = ½ × (7 + 11) × h
2
Simplify the bracket and the half. 45 = ½ × 18 × h = 9h
3
Solve the equation. h = 45 ÷ 9 = 5
h = 5 cm
Exam tip Paper 4 often runs this topic backwards: given the area, find a length. The method is always the same — substitute what you know, then solve. Check by going forwards: ½ × 18 × 5 = 45 ✓
Example 5A photograph measuring 30 cm by 20 cm is surrounded by a frame of uniform width 4 cm. Find the area of the frame.
1
Find the outer dimensions. The 4 cm border sits on both sides of each dimension, so add 4 twice. outer length = 30 + 4 + 4 = 38 cm
outer width  = 20 + 4 + 4 = 28 cm
2
The frame is the outer rectangle with the photograph removed — a subtraction problem. A = 38 × 28 − 30 × 20
3
Evaluate each part, then subtract. A = 1064 − 600 = 464
Area of frame = 464 cm²
Exam trap Adding the border width only once (giving 34 × 24) is the error the question is built to catch. A uniform border always adds twice its width to each dimension. Sketch the frame and this becomes obvious.

Your turn

Practice set

  1. A rectangle measures 9 cm by 4 cm. Find its perimeter and its area.
  2. Convert (a) 3 m² to cm²  (b) 520 mm² to cm².
  3. A triangle has base 12 cm, perpendicular height 7 cm and slant sides 8.6 cm. Find its area.
  4. Find the area of a trapezium with parallel sides 5 cm and 9 cm that are 6 cm apart.
  5. An L-shape is made by removing a 5 cm by 4 cm rectangle from one corner of a 14 cm by 9 cm rectangle. Find the area and the perimeter of the L-shape.

  1. P = 2(9 + 4) = 26 cm;  A = 9 × 4 = 36 cm²
  2. (a) 3 × 10 000 = 30 000 cm²  (b) 520 ÷ 100 = 5.2 cm²
  3. Ignore the slant sides: A = ½ × 12 × 7 = 42 cm²
  4. A = ½(5 + 9) × 6 = ½ × 14 × 6 = 42 cm²
  5. Area: 14 × 9 − 5 × 4 = 126 − 20 = 106 cm². Perimeter: a corner notch keeps the boundary length of the full rectangle, 2(14 + 9) = 46 cm.

Key points to remember

  • Perimeter is a length (cm), area is a surface (cm²) — never mix the units.
  • In a rectilinear shape, label every unmarked side first: opposite horizontal edges match, and so do opposite vertical edges.
  • Rectangle lw · triangle ½bh · parallelogram bh · trapezium ½(a+b)h — only the triangle formula is given in the exam.
  • Always use the perpendicular height, never the slant side — the slant length on the diagram is usually a decoy.
  • Compound shapes: split and add, or subtract the missing piece — one clear calculation per piece earns the method marks.
  • Area units use the squared length factor: 1 m² = 10 000 cm², 1 cm² = 100 mm².

Where next?

✅ Mark scheme All notes

Progress is saved on this device only and appears on the notes home page.