Skip to content
MathClicksIGCSE← All notes Cambridge IGCSE® Mathematics 0580 Extended Chapter 21 — Ratio, Rate and Proportion

21.3  Distance–Time and Speed–Time Graphs

Reading journeys from travel graphs — gradient as speed on a distance–time graph, gradient as acceleration and area as distance on a speed–time graph.

Distance–time graphs

A distance–time graph (a travel graph) tells the story of a journey. Time runs along the horizontal axis and distance from the starting point runs up the vertical axis. Every feature of the line means something physical — and Paper 2 and Paper 4 both expect you to translate between the picture and the journey without being told how.

Key idea On a distance–time graph the gradient of the line is the speed. A steeper line means a faster journey. Gradient = change in distancechange in time, so the units come straight from the axes: km ÷ hours gives km/h, metres ÷ seconds gives m/s.

Straight line sloping up

Moving away from the start at a constant speed. Gradient = speed.

Horizontal line

Stopped. Time passes but the distance does not change, so the speed is zero.

Straight line sloping down

Coming back towards the start. The gradient is negative; the speed is its size.

Curved line

The speed is changing — speeding up if the curve gets steeper, slowing down if it flattens.

A complete journey: out, rest, and home again

0 20 40 60 80 100 120 Time (minutes) 0 4 8 12 Distance from home (km) 18 km/h out stopped 12 km/h back

Out: 12 km in 40 min. Rest: 20 min. Home: 12 km in 60 min. The return slope is shallower, so the return is slower — you can see it before you calculate anything.

Example 1Using the graph above: a cyclist rides 12 km in 40 minutes, rests for 20 minutes, then rides home in 60 minutes. Find (a) the speed on each moving stage, (b) the average speed for the whole journey, in km/h.
1
(a) First stage: convert 40 minutes to hours before dividing. speed = 12 ÷ 4060 = 12 ÷ 23 = 18 km/h
2
Return stage: 12 km in 60 minutes = 1 hour. speed = 12 ÷ 1 = 12 km/h
3
(b) Average speed uses the total distance travelled and the total time, including the rest. total distance = 12 + 12 = 24 km
total time = 40 + 20 + 60 = 120 min = 2 h
4
Divide. average speed = 24 ÷ 2 = 12 km/h
(a) 18 km/h out, 12 km/h back    (b) average speed = 12 km/h
Watch out Average speed is not the average of 18 and 12, and you must not leave out the rest stop. It is always total distance ÷ total time. And the cyclist ends where they started — but the distance travelled is 24 km, not 0.

Comparing two journeys on one graph

When two travellers are drawn on the same axes, the questions almost write themselves: the steeper line is the faster traveller, and the point where the lines cross is where one overtakes (or meets) the other — same time, same distance from the start. You can answer meet-point questions from the graph, or with a little algebra:

Example 2Towns P and Q are 150 km apart. Amir leaves P at 08 00 driving towards Q at a steady 60 km/h. Beatrice leaves Q at 08 30 driving towards P at a steady 90 km/h. Find the time at which they meet, and how far from P they are.
1
Let t be the time in hours after 08 00. Write Amir’s distance from P. dA = 60t
2
Beatrice starts half an hour later and drives towards P, so her distance from P falls from 150. dB = 150 − 90(t − 0.5)
3
On the graph they meet where the two lines cross — set the distances equal. 60t = 150 − 90t + 45
150t = 195
t = 1.3 h
4
Convert 0.3 h to minutes and find the meeting distance. 0.3 × 60 = 18 min  →  they meet at 09 18
distance from P = 60 × 1.3 = 78 km
They meet at 09 18, 78 km from P
Check it By 09 18 Beatrice has driven for 0.8 h at 90 km/h, which is 72 km from Q — and 150 − 72 = 78 km from P. Both stories agree, so the answer stands.

Speed–time graphs

Now change what the vertical axis measures. On a speed–time graph the height of the line is the speed at that instant — so the same shapes now mean completely different things, and this is where most marks are lost.

Key idea On a speed–time graph the gradient is the acceleration: how quickly the speed is changing. Gradient = change in speedchange in time. A positive gradient means accelerating, a negative gradient means decelerating, and a zero gradient (horizontal line) means the speed is not changing.
acceleration = change in speedtime taken     e.g. 24 m/s8 s = 3 m/s² Units: (m/s) per second = m/s²
Watch out — the classic confusion A horizontal line on a distance–time graph means stopped. A horizontal line on a speed–time graph means constant speed — the object is still moving, just not speeding up or slowing down. Before you interpret anything, read the label on the vertical axis and say to yourself which graph you are holding. Examiners set this trap every year.

Same shape, two meanings

FeatureDistance–timeSpeed–time
Gradientspeedacceleration
Horizontal linestoppedconstant speed
Line sloping downreturning to startdecelerating
Area under graph(not used)distance travelled
Line reaches zeroback at the startat rest

Units discipline

Keep the axes’ units together all the way through:

  • m/s and seconds → acceleration in m/s², distance in metres.
  • km/h and hours → distance in km.
  • To convert, use m/s × 3.6 = km/h — so 18 km/h ÷ 3.6 = 5 m/s, because 18 km/h is 18 000 m in 3600 s.
  • Never mix minutes with m/s in one calculation — convert first.

Journey explorer

Build a three-stage journey and watch the graph redraw to scale. The default is the car from Example 3. Switch to distance–time and try Example 1’s cyclist: times 40, 20, 60 and distances 12, 12, 0.

Area under a speed–time graph

Here is the fact that unlocks nearly every Paper 4 travel-graph question. In each second, the distance covered is (speed × 1 second) — a thin strip under the graph. Add all the strips and you get the whole region under the line:

Key idea Distance travelled = area under the speed–time graph. Because the syllabus keeps the graph made of straight-line sections, the region is always built from rectangles, triangles and trapezia — shapes you can find exactly.
rectangle = b × h    triangle = ½ × b × h    trapezium = ½(a + b) × h The only three areas you ever need under a straight-line graph

The classic trapezium journey (Example 3’s car)

0 8 28 40 Time (s) 24 0 Speed (m/s) 96 m 480 m 144 m accelerate constant speed decelerate
Example 3A car accelerates uniformly from rest to 24 m/s in 8 seconds, travels at 24 m/s for 20 seconds, then decelerates uniformly to rest in 12 seconds. Find (a) the acceleration, (b) the deceleration, (c) the total distance travelled.
1
(a) Acceleration is the gradient of the first section. a = 24 − 08 = 3 m/s²
2
(b) The last section drops 24 m/s in 12 s. gradient = 0 − 2412 = −2  →  deceleration = 2 m/s²
3
(c) Split the region under the graph into a triangle, a rectangle and a triangle. ½ × 8 × 24 = 96 m
20 × 24 = 480 m
½ × 12 × 24 = 144 m
4
Add them up — or treat the whole shape as one trapezium with parallel sides 40 s and 20 s, height 24. 96 + 480 + 144 = 720 m
check: ½(40 + 20) × 24 = 720 ✓
(a) 3 m/s²   (b) 2 m/s²   (c) 720 m
Exam tip Mark scheme language matters here: writing the three separate areas earns method marks even if the arithmetic slips. Draw the split on the diagram, label each shape’s area, then add. If the whole region is a trapezium, the one-line trapezium formula is a fast check of your answer.

Curved graphs and tangents

Real journeys are rarely made of perfect straight lines. When a distance–time graph curves, the speed is different at every instant — so the question becomes “estimate the speed at t = 3”. The technique: place a ruler so it just touches the curve at that point, draw the tangent, and find its gradient.

Key idea The gradient of the tangent at a point is the rate of change at that instant: the speed on a distance–time graph, the acceleration on a speed–time graph. Because a hand-drawn tangent is approximate, your answer is an estimate and the mark scheme accepts a sensible range.

Estimating speed at t = 3 s from a curved distance–time graph

0 1 2 3 4 5 Time (s) 9 Distance (m) (1.5, 0) (5, 21) tangent touches here

The orange tangent touches the curve only at t = 3. Pick two easy-to-read points on the tangent (not on the curve!) and use rise ÷ run — that calculation is Example 4 below.

Why this works Zoom in far enough and any smooth curve looks straight. The tangent is that “local straight line”, so its gradient is the curve’s gradient at the point of contact. In the graph above the curve gets steeper as time passes — the object is accelerating, and the tangent at t = 4 would be steeper than the one at t = 3.

More worked examples

Example 4Using the tangent drawn in the Curves section: it touches the curve at t = 3 and passes through the points (1.5, 0) and (5, 21). Estimate the speed at t = 3.
1
Read two points off the tangent line and find rise and run. rise = 21 − 0 = 21 m
run = 5 − 1.5 = 3.5 s
2
Gradient of the tangent = estimated speed at the point of contact. speed ≈ 21 ÷ 3.5 = 6 m/s
speed at t = 3 ≈ 6 m/s
Mark scheme language The command word is estimate, so any answer from a correctly drawn tangent scores — typically anything from about 5.5 to 6.5 m/s here. You must show the tangent on the graph and the rise ÷ run working to earn the method marks.
Example 5A train leaves a station and accelerates uniformly from rest at 0.5 m/s² for 60 seconds, then continues at a constant speed. Find (a) its speed after 60 s, (b) the distance covered while accelerating, (c) the total time taken to travel 2.4 km from the station.
1
(a) Acceleration is the gradient, so change in speed = gradient × time. v = 0.5 × 60 = 30 m/s
2
(b) While accelerating, the region under the graph is a triangle. distance = ½ × 60 × 30 = 900 m
3
(c) Work in metres: 2.4 km = 2400 m. Find what is left after the triangle. remaining distance = 2400 − 900 = 1500 m
4
The rest is covered at a constant 30 m/s — a rectangle whose width is the missing time. time = 1500 ÷ 30 = 50 s
5
Add the two stages. total time = 60 + 50 = 110 s = 1 min 50 s
(a) 30 m/s   (b) 900 m   (c) 110 s
Exam trap You cannot write 2400 ÷ 30 = 80 s — the train is not doing 30 m/s for the whole journey. Whenever the speed changes, distance = speed × time only works stage by stage; the area under the graph is what carries you through. This “reverse area” step — given the distance, find the time — is a favourite final part on Paper 4.

Your turn

Practice set

  1. A walker covers 6 km in 1½ hours at a steady pace. What speed does the gradient of her distance–time graph show?
  2. On a distance–time graph of a delivery van, the line is horizontal from 09 20 to 09 40. What was the van doing, and for how long?
  3. A motorbike accelerates uniformly from rest to 15 m/s in 6 seconds. Find (a) the acceleration, (b) the distance travelled in those 6 seconds.
  4. A car travels at a constant 20 m/s for 30 s, then decelerates uniformly to rest in 10 s. Find the total distance travelled and the average speed for the 40 seconds.
  5. A cyclist accelerates uniformly from rest to 8 m/s in 10 s, then holds 8 m/s. How long in total does she take to travel 200 m?

  1. 6 ÷ 1.5 = 4 km/h
  2. Horizontal on a distance–time graph means stopped — the van was parked for 20 minutes.
  3. (a) 15 ÷ 6 = 2.5 m/s²  (b) triangle: ½ × 6 × 15 = 45 m
  4. Rectangle 20 × 30 = 600, triangle ½ × 10 × 20 = 100, so 700 m; average speed 700 ÷ 40 = 17.5 m/s
  5. Accelerating: ½ × 10 × 8 = 40 m. Remaining 160 ÷ 8 = 20 s. Total 10 + 20 = 30 s

Key points to remember

  • On a distance–time graph, gradient = speed; horizontal means stopped, sloping down means coming back, and the lines of two travellers cross where they meet.
  • On a speed–time graph, gradient = acceleration; negative gradient is deceleration and horizontal means constant speed, not stopped.
  • Distance travelled = area under the speed–time graph — split it into rectangles, triangles and trapezia and add.
  • Average speed = total distance ÷ total time, including any stops — never the average of the stage speeds.
  • For a curved graph, draw a tangent at the point and use rise ÷ run to estimate the rate of change at that instant.
  • Keep units consistent: seconds with m/s, hours with km/h, and convert with m/s × 3.6 = km/h before you mix them.
  • Given a distance and asked for a time, work backwards from the area stage by stage.

Where next?

✅ Mark scheme All notes

Progress is saved on this device only and appears on the notes home page.