Rounding to a given place
Rounding replaces a number by a nearby, simpler one. The method never changes:
Why 347 rounds to 350
Decimal places
“2 decimal places” (2 d.p.) means keep exactly two digits after the decimal point.
| Number | Rounded to | Deciding digit | Answer |
|---|---|---|---|
| 3.14159 | 2 d.p. | 1 (the 3rd decimal) — less than 5 | 3.14 |
| 3.14159 | 3 d.p. | 5 (the 4th decimal) — round up | 3.142 |
| 2.397 | 2 d.p. | 7 — round up, 9 becomes 10 so carry | 2.40 |
| 0.0648 | 1 d.p. | 6 — round up | 0.1 |
Nearest 10, 100 or 1000
Exactly the same rule, but the deciding digit is now to the left of the point, and the discarded digits are replaced by zeros to hold the place value.
| Number | Nearest 10 | Nearest 100 | Nearest 1000 |
|---|---|---|---|
| 27 483 | 27 480 | 27 500 | 27 000 |
| 6 451 | 6 450 | 6 500 | 6 000 |
| 349 | 350 | 300 | 0 |
Example 1Round 7.4863 to (a) 3 d.p., (b) 2 d.p., (c) 1 d.p.
Significant figures
Significant figures count from the first non-zero digit, reading left to right. They tell you how many digits actually carry information, whatever the size of the number.
- Zeros before the first non-zero digit are never significant: in 0.00408 the significant figures are 4, 0, 8.
- Zeros between significant digits always are: 4.05 has 3 s.f.
- Zeros at the end of a whole number are place-holders, not extra accuracy: 46 000 written to 2 s.f. has significant figures 4 and 6.
| Number | 1 s.f. | 2 s.f. | 3 s.f. |
|---|---|---|---|
| 45 682 | 50 000 | 46 000 | 45 700 |
| 8 496 | 8 000 | 8 500 | 8 500 |
| 0.004572 | 0.005 | 0.0046 | 0.00457 |
| 0.9962 | 1 | 1.0 | 0.996 |
Example 2Write 0.0030649 correct to 3 significant figures.
Rounding tool
Type a number, choose how to round it, and the digit that makes the decision is highlighted in orange. For “nearest”, the amount means 1 = nearest 10, 2 = nearest 100, 3 = nearest 1000.
Estimating
An estimate is a quick, calculator-free check. The 0580 instruction is almost always the same: “By writing each number correct to 1 significant figure, estimate the value of…” You must show the rounded numbers — that is where the method mark lives.
Estimating a square root
Trap the number between the two square numbers either side, then judge where it sits.
48
36 < 48 < 49, so 6 < 48 < 7. 48 is very close to 49, so the root is just under 7 — about 6.9.
(The true value is 6.928…)
19.6 × 4.1
Round first: 20 × 4 = 80. Then 64 < 80 < 81, so the answer is just under 9 — about 9.
(The true value is 8.964…)
Over-estimate or under-estimate?
| What you did | Effect on the estimate |
|---|---|
| Rounded a number on the top up | estimate gets bigger |
| Rounded a number on the top down | estimate gets smaller |
| Rounded the bottom up | estimate gets smaller |
| Rounded the bottom down | estimate gets bigger |
If every rounding pushes the same way you can state the answer with certainty. If they pull in opposite directions, compare the estimate with the calculator value and say which is larger.
Example 3Estimate the value of 38.7 × 5.20.49 and say whether your estimate is an over- or under-estimate.
More worked examples
Example 4Round (a) 19.97 to 1 decimal place, (b) 0.9962 to 2 significant figures.
Example 5Write 348 517 correct to (a) 3 significant figures, (b) the nearest 100.
Example 6By writing each number correct to 1 significant figure, estimate 4.87 × 19.60.51 × 3.9. State whether it is an over- or under-estimate.
0.5 × 4 = 2
Example 7Work out 2.7 × 3.61.9 correct to 3 significant figures, and show what goes wrong if you round part-way through.
9.72 ÷ 1.9 = 5.11578…
Your turn
Practice set
- Round 5.7648 to (a) 3 d.p. (b) 2 d.p. (c) 1 d.p.
- Write correct to 3 significant figures: (a) 0.045678 (b) 27 049 (c) 9.0985
- Round 34 682 to the nearest (a) 10 (b) 100 (c) 1000
- By writing each number correct to 1 significant figure, estimate 58.3 × 0.4122.87.
- Estimate 150 without a calculator, giving your answer to 1 decimal place.
- (a) By rounding each number to 1 significant figure, estimate 9.87²0.48 × 5.1. (b) Is your estimate an over- or under-estimate?
- Deciding digits 8, 4, 6 in turn: (a) 5.765 (b) 5.76 (c) 5.8
- (a) s.f. are 4, 5, 6 with deciding digit 7 → 0.0457 (b) s.f. are 2, 7, 0 with deciding digit 4 → 27 000 (c) s.f. are 9, 0, 9 with deciding digit 8, so 9.09 rounds up → 9.10
- (a) deciding digit 2 → 34 680 (b) deciding digit 8 → 34 700 (c) deciding digit 6 → 35 000
- (60 × 0.4) ÷ 3 = 24 ÷ 3 = 8 (true value 8.37, so an under-estimate)
- 144 < 150 < 169, so the root is between 12 and 13 and much closer to 12 → ≈ 12.2 (true value 12.247…)
- (a) 10² ÷ (0.5 × 5) = 100 ÷ 2.5 = 40 (b) exact value 97.4169 ÷ 2.448 = 39.8, so it is an over-estimate
Key points to remember
- Find the deciding digit — the first digit thrown away. 5 or more rounds up, 4 or less leaves the kept digit alone.
- Always round the original number. Rounding in two stages can give the wrong answer.
- Significant figures start at the first non-zero digit. Leading zeros in a decimal are never significant; zeros in the middle always are.
- When you cut a whole number short, fill the gap with zeros to hold the place value: 45 682 to 2 s.f. is 46 000.
- Keep the trailing zero the accuracy demands: 2.397 to 2 d.p. is 2.40, and 0.9962 to 2 s.f. is 1.0.
- To estimate, write every number to 1 significant figure, show that line, then work the result out exactly.
- For a square root, trap the number between the two square numbers on either side.
- Rounding the top up (or the bottom down) makes an estimate too big; the reverse makes it too small.
- Never round mid-calculation — use Ans — and give final answers to 3 significant figures unless the question says otherwise.
Where next?
📚 Take the full lesson
Rounding and Estimating — objectives, a starter, worked examples, practice and an exit check, taught step by step.
✏️ Practise exam questions
Approximation and Estimation — 25 exam-style questions worth 90 marks, with full answers and the mark scheme.
Progress is saved on this device only and appears on the notes home page.