Measuring Angles and Arcs

GeometryModule 10: CirclesGeometry and Trigonometry

Learn measuring angles and arcs step by step with worked examples you can follow. Then practise with 37 instant-feedback questions. Free Geometry lesson from Mr Ahmed Hamouda.

Find the measures of central angles and arcs, add adjacent arcs, and compute arc length in both degrees and radians.

Core Concepts

1. Central Angles — the angle that "owns" the arc

A central angle is an angle that sits right at the middle of the circle. Its vertex is the center, and both of its sides are radii. Because the two sides reach all the way out to the circle, a central angle "cuts out" a piece of the circle — and the size of that piece is exactly the size of the angle.

central angle of a circle — an angle with a vertex at the center of a circle and sides that are radii. In ☉B, ∠ABC is a central angle.
degree — 1⁄360 of the circular rotation about a point. That is why one full turn is 360°.
Key Concept · Sum of Central Angles
Words: The sum of the measures of the central angles of a circle with no interior points in common is 360°.
Example: m∠1 + m∠2 + m∠3 = 360°
Why it works: "No interior points in common" just means the angles do not overlap. Laid side by side they sweep out one complete rotation, and one complete rotation is 360 degrees.

2. Arcs: minor, major, and semicircle

An arc is a piece of the circle itself — the curved part, not the region inside. Any two points on a circle split it into two arcs: a short one and a long one.

arc — part of a circle defined by two endpoints.
minor arc — an arc measuring less than 180°. Its measure equals its related central angle: m(arc PR) = m∠PQR.
major arc — an arc measuring more than 180°. m(arc PSR) = 360° − m(arc PR).
semicircle — an arc measuring exactly 180°. Its endpoints lie on a diameter: m(arc RST) = 180°.
congruent arcs — arcs in the same circle, or in congruent circles, that have the same measure.
adjacent arcs — arcs of a circle that have exactly one point in common.
Study Tip — Naming Arcs: Minor arcs are named by just their two endpoints (arc PR). Major arcs and semicircles need three letters: the two endpoints plus a point on the arc that lies between them (arc PSR). Without the middle letter nobody can tell which way around the circle you went.
Theorem 10.2
Words: In the same circle or in congruent circles, two minor arcs are congruent if and only if their central angles are congruent.
Example: If ∠1 ≅ ∠2, then arc FG ≅ arc HJ. If arc FG ≅ arc HJ, then ∠1 ≅ ∠2.
Watch Out! "If and only if" means the statement works in both directions. Equal central angles force equal arcs, and equal arcs force equal central angles — but only inside the same circle or congruent circles. A 60° arc on a tiny circle and a 60° arc on a huge circle have the same measure but very different lengths.

3. Adding arcs

If two arcs touch at exactly one point, you can glue them together and just add their measures — exactly like adjacent angles.

Postulate 10.2 · Arc Addition Postulate
Words: The measure of an arc formed by two adjacent arcs is the sum of the measures of the two arcs.
Example: m(arc XZ) = m(arc XY) + m(arc YZ)

4. Arc length — how far is it, really?

The measure of an arc is in degrees. The arc length is the actual distance you would walk along the curve, in centimetres, metres, inches … An arc is a fraction of the whole circle, so its length is that same fraction of the circumference.

Key Concept · Arc Length in Degrees
Words: The ratio of the length of an arc ℓ to the circumference of the circle is equal to the ratio of the degree measure of the arc to 360°.
Proportion:   ℓ ÷ (2πr) = x ÷ 360
Equation:     ℓ = (x / 360) · 2πr
Watch Out! — Arc Length vs. Arc Measure: The length of an arc is given in linear units such as centimetres. The measure of an arc is given in degrees. They are different quantities and they are never interchangeable.
Problem-Solving Tip: If you forget the formula, rebuild it. An arc is a portion of a circle, so its length is a fraction of the circumference. That fraction is (arc measure)/360. Multiply it by 2πr and you are done.

5. Radian measure

Degrees are an arbitrary human choice. A radian is the natural unit: it is the angle you get when the arc you cut off is exactly as long as the radius.

arc length — the distance between the endpoints of an arc measured along the arc, in linear units.
radian — a unit of angular measurement equal to 180°/π, or about 57.296°.
Key Concept · Radian Measure
The radian measure θ of a central angle is the ratio of the arc length to the radius of the circle.
θ = ℓ / r   radians   ⇒   ℓ = rθ
Key Concept · Degree and Radian Conversion Rules
To convert a degree measure to radians, multiply by π radians / 180°.
To convert a radian measure to degrees, multiply by 180° / π radians.

Both rules are just multiplying by 1, because 180° = π radians. Put the unit you want on top.

1
Central angles that do not overlap add to 360°.
2
A minor arc has the same measure as its central angle. A major arc is 360° − the minor arc. A semicircle is 180°.
3
Adjacent arcs add: m(arc XZ) = m(arc XY) + m(arc YZ).
4
Arc length: ℓ = (x/360) · 2πr  (degrees)  or  ℓ = rθ  (radians).
5
180° = π radians. Degrees → radians: × π/180. Radians → degrees: × 180/π.

Key Figures

Click a chip under any diagram to isolate that part of the picture. Click it again to bring everything back.

Central Angle, Minor Arc, Major Arc
100° minor arc AB = 100° major arc ACB = 260° A B C O
∠AOB is a central angle of ☉O, so m(arc AB) = m∠AOB = 100°. The major arc uses the third letter C: m(arc ACB) = 360° − 100° = 260°. Together the two arcs make the whole circle: 100 + 260 = 360.
A Diameter Creates Two Semicircles
arc PRQ = 180° arc PSQ = 180° P Q R S O
Because PQ is a diameter, ∠POQ is a straight angle of 180°. Each half of the circle is therefore a semicircle of exactly 180°. Note the three-letter names: arc PRQ and arc PSQ are different arcs even though they share endpoints P and Q.
Arc Addition Postulate
70° 50° X Y Z W m(arc XZ) = 70° + 50° = 120°
arc XY and arc YZ are adjacent — they meet at exactly one point, Y. So their measures simply add: m(arc XZ) = m(arc XY) + m(arc YZ) = 120°.
Arc Length and Radian Measure
r 60° ℓ A B O ℓ = (60/360) · 2πr   and   θ = ℓ/r = π/3 radians
The 60° central angle cuts off 60⁄360 = 1⁄6 of the circumference. In radians the same angle is ℓ/r = π/3 ≈ 1.047 radians — the arc is a little longer than one radius.

Move It Yourself

Worked Examples

Find the value of x.
90° 40° 85° x° B C D E A
Four central angles of ☉A with no interior points in common.
1m∠EAB + m∠BAC + m∠CAD + m∠DAE = 360°Sum of central angles
290 + 40 + 85 + x = 360Substitution
3215 + x = 360Simplify
4x = 145Solve
x = 145
Check: 90 + 40 + 85 + 145 = 360 ✓
Trap: The right-angle square is a measurement too. It is worth 90° and it must be included in the sum — students who only add the three printed numbers get x = 235.
PM is a diameter of ☉R. Identify each arc as a major arc, minor arc, or semicircle. Then find its measure.   a. arc MQ   b. arc MNP   c. arc MNQ
115° P M Q N R
∠PRQ = 115°; ∠NRP is a right angle; PM passes through the center R.

a. arc MQ — minor arc

m(arc MQ) = m∠MRQ
∠MRQ and ∠PRQ form a linear pair
m∠MRQ = 180 − 115 = 65
m(arc MQ) = 65°

b. arc MNP — semicircle

P and M are the ends of diameter PM
so arc MNP is a semicircle
m(arc MNP) = 180°
1c. arc MNQ shares endpoints M and Q with minor arc MQ, but goes the long way through NClassify: major arc
2m(arc MNQ) = 360° − m(arc MQ)Major arc rule
3= 360 − 65 = 295Substitute and simplify
a. 65° (minor)  ·  b. 180° (semicircle)  ·  c. 295° (major)
Check: 65 + 295 = 360 ✓ — a minor arc and its matching major arc must always complete the circle.
The circle graph ☉P is divided into sectors by percent. The sector between D and E is 12% of the whole circle. Find m(arc DE).
44% 20% 14% 12% 7% 3% A F E D C B P
Every sector of a circle graph is a central angle, so its degree measure is that percent of 360°. The highlighted sector DPE is 12%.
1arc DE is a minor arcit measures less than 180°
2m(arc DE) = m∠DPEMinor arc = its central angle
3m∠DPE = 0.12(360°)Find 12% of 360°
4= 43.2°Simplify
m(arc DE) = 43.2°
Check: 44 + 20 + 14 + 12 + 7 + 3 = 100%, and 158.4 + 72 + 50.4 + 43.2 + 25.2 + 10.8 = 360° ✓
Find m(arc WY) in ☉V.
62° W X Y Z V
arc WX and arc XY are adjacent arcs that meet at X (shown in green).
1m(arc WY) = m(arc WX) + m(arc XY)Arc Addition Postulate
2= m∠WVX + m∠XVYm(arc WX) = m∠WVX, m(arc XY) = m∠XVY
3= 90° + 62°Substitution
4= 152°Simplify
m(arc WY) = 152°
Check: 152° < 180°, so arc WY really is a minor arc and a two-letter name is correct. ✓
Find the length of arc AB to the nearest hundredth. In ☉O the diameter is 14 m and m∠AOB = 80°.
14 m 80° A B O
The diameter is 14 m, so the radius is r = 7 m.
1ℓ = (x / 360) · 2πrArc Length Equation
2r = 14 ÷ 2 = 7Radius is half the diameter
3ℓ = (80 / 360) · 2π(7)Substitution
4= (2/9) · 14π = 28π/9Simplify the fraction
5≈ 9.77Use a calculator
arc AB ≈ 9.77 m
Check: The whole circumference is 2π(7) ≈ 43.98 m, and 80° is about two ninths of the circle. 43.98 ÷ 9 × 2 ≈ 9.77 ✓
Trap: 14 is the diameter, not the radius. Using r = 14 gives 19.55 m — exactly double the correct answer.
Write 135° in radians as a multiple of π.
1135° = 135° × (π radians / 180°)Multiply by π radians / 180°
2= 135π / 180 radiansMultiply
3= 3π / 4 radiansSimplify (divide 135 and 180 by 45)
135° = 3π/4 radians
Check: 3π/4 ≈ 2.356 radians, and 2.356 × 57.296 ≈ 135° ✓
Tip: Write the conversion factor with the unit you want on top. Going to radians? Put π radians on top so the degrees cancel.
Write 11π/6 radians in degrees.
111π/6 radians = (11π/6) × (180° / π radians)Multiply by 180° / π radians
2= 11 × 180 / 6 degreesThe π and the radians cancel
3= 1980 / 6 = 330Simplify
11π/6 radians = 330°
Check: 11π/6 is just under 2π (a full turn), and 330° is just under 360° ✓
Find the length of arc ZY to the nearest hundredth. In ☉O the radius is 9 cm and ∠ZOY = 3π/4 radians.
3π/4 9 cm Z Y O
3π/4 radians = 135°, so Z sits 135° counterclockwise from Y.
1θ = ℓ / rRadian measure equation
23π/4 = ℓ / 9θ = 3π/4, r = 9
39(3π/4) = ℓMultiply each side by 9
427π/4 = ℓSimplify
5ℓ ≈ 21.21Use a calculator
arc ZY ≈ 21.21 cm
Check with degrees: 3π/4 rad = 135°, so ℓ = (135/360) · 2π(9) = 0.375 × 56.549 ≈ 21.21 cm ✓ Same answer, two routes.
Why radians are nicer: in radians the arc length formula collapses to ℓ = rθ — no 360, no 2π. That is the whole point of the unit.

Try It Yourself

Try It 1 — classify and measure

GJ is a diameter of ☉K and m∠GKH = 122°. Identify each arc as a major arc, minor arc, or semicircle, then find its measure:  a. arc GH  b. arc GLH  c. arc GLJ
122° G J H L K
1a. arc GH: minor arc, m = m∠GKH = 122°minor arc = central angle
2b. arc GLH: major arc, m = 360 − 122 = 238°same endpoints, long way
3c. arc GLJ: semicircle, m = 180°GJ is a diameter
a. 122°  ·  b. 238°  ·  c. 180°

Try It 2 — several arcs at once

AC and EB are diameters of ☉R. Find m(arc EA), m(arc CB), m(arc DC) and m(arc AB).
30° 100° 50° E D C B A R
1m∠ERD + m∠DRC + m∠CRB = 30 + 100 + 50 = 180°E, R, B are collinear (diameter)
2∠ERA and ∠CRB are vertical anglesEB and AC are intersecting diameters
3m(arc EA) = m∠ERA = m∠CRB = 50°vertical angles are congruent
4m(arc CB) = m∠CRB = 50°given
5m(arc DC) = m∠DRC = 100°given
6m(arc AB) = 360 − (30 + 100 + 50 + 50) = 130°arcs of a circle sum to 360°
arc EA = 50°  ·  arc CB = 50°  ·  arc DC = 100°  ·  arc AB = 130°
Check: 30 + 100 + 50 + 130 + 50 = 360 ✓

Try It 3 — arc length from degrees

In ☉O the radius is 3 cm and m∠POQ = 45°. Find the length of arc PQ to the nearest hundredth.
1ℓ = (45 / 360) · 2π(3)Arc Length Equation
2= (1/8) · 6π = 3π/4Simplify
3≈ 2.36Use a calculator
arc PQ ≈ 2.36 cm

Try It 4 — degrees to radians

Write 240° in radians as a multiple of π. Then write 150° in radians.
1240 × (π/180) = 240π/180Multiply by π/180
2= 4π/3 radiansDivide top and bottom by 60
3150 × (π/180) = 150π/180 = 5π/6 radiansDivide top and bottom by 30
240° = 4π/3 radians  ·  150° = 5π/6 radians

Try It 5 — radians to degrees

Write 2π/3 radians in degrees. Then write 3π/2 radians in degrees.
1(2π/3) × (180/π) = 2(180)/3 = 360/3Multiply by 180°/π radians
2= 120°Simplify
3(3π/2) × (180/π) = 3(180)/2 = 540/2 = 270°Same rule
2π/3 radians = 120°  ·  3π/2 radians = 270°

Try It 6 — arc length from radians

In ☉O the radius is 2 in. and ∠MON = 7π/12 radians. Find the length of arc MN to the nearest hundredth.
1θ = ℓ/r ⇒ ℓ = rθRadian arc length
2ℓ = 2(7π/12) = 14π/12 = 7π/6Substitute and simplify
3≈ 3.67Use a calculator
arc MN ≈ 3.67 in.
Check: 7π/12 rad = 105°, and (105/360) · 2π(2) = 3.665 ✓

Summary

SituationWhat to doResult
Several non-overlapping central angles fill the circleSet their sum equal to 360° and solvem∠1 + m∠2 + … = 360°
You need a minor arc (two-letter name)Read off its central anglem(arc AB) = m∠AOB
You need a major arc (three-letter name)Subtract the minor arc from a full circle360° − m(arc AB)
The endpoints lie on a diameterRecognise a semicircle180°
Two arcs share exactly one endpointApply the Arc Addition Postulatem(arc XZ) = m(arc XY) + m(arc YZ)
Two central angles in one circle are congruentApply Theorem 10.2their minor arcs are congruent
A sector is given as a percent of a circle graphMultiply the percent by 360°m∠ = (percent)(360°)
You need the actual length of an arc, angle in degreesTake that fraction of the circumferenceℓ = (x/360) · 2πr
You need the actual length of an arc, angle in radiansMultiply radius by the radian measureℓ = rθ
Convert degrees → radiansMultiply by π/180 and simplifyx° · π/180
Convert radians → degreesMultiply by 180/π and simplifyθ · 180/π
m∠1 + m∠2 + m∠3 = 360° m(arc AB) = m∠AOB major = 360° − minor semicircle = 180° m(arc XZ) = m(arc XY) + m(arc YZ) ℓ/(2πr) = x/360 ℓ = (x/360) · 2πr θ = ℓ/r ℓ = rθ 180° = π radians 1 radian = 180°/π ≈ 57.296°
Common mistakes to avoid:
  • Forgetting that a right-angle square in the figure is worth 90° in the sum.
  • Naming a major arc with only two letters — it becomes ambiguous with the minor arc.
  • Confusing arc measure (degrees) with arc length (cm, m, in.).
  • Plugging the diameter into 2πr and doubling the answer.
  • Using ℓ = rθ while θ is still in degrees — that formula only works in radians.
  • Applying Theorem 10.2 across circles of different sizes; it needs the same circle or congruent circles.
  • Rounding halfway through. Keep the exact value (like 27π/4) until the last step.

Practice Quiz

15 questions · click an answer to check it instantly

0/15

๐Ÿ“ Test your understanding